| GENERAL
INFORMATION |
| The EEC Industrial WWTP systems are
based on the EEC High-Speed Bio-Tec biodegradation and sedimentation technology which is unique due to its compactness and performance in respect of volumetric efficiency. These technologies are combined in a prefabricated, skid mounted or containerized tank system with variable length, suitable for overseas transportation inside or as ISO freight containers.
|
|
| CONTAINER
SOLUTION
FOR
INDUSTRIAL
WASTEWATER |
| The
containerized
systems
are
configured
in
ISO
containers
designed
for
unprotected,
outdoor
locations
with
all
machinery
well
covered
inside
the
container
door.
They
are
configured
in
20,
30,
and
40
feet
lengths
and
are
transported
as
is.
Once
in
place,
the
container
corners
are
used
to
fix
the
units
to
the
foundation.
Consequently,
they
can
easily
be
shifted
around
to
new
locations
or
demobilized.
|
| DIMENSION CRITERIA |
| Any treatment plant must be based on actual measurements
of the waste stream with respect to hydraulic and organic load. The critical parameter is
daily average flow, peak flow and influent/effluent BOD5 and TSS. |
|
.. |
| For common applications such as pulp and paper,
dairies and other applications in the food processing industry, there is sufficient
experience at hand in order to design a system and guarantee the effluent, based on such
information. |
|
.. |
| Designs for new applications should be based on a
full waste water analysis and followed up by a test program in order to verify the design
and guarantee the effluent. Such tests may range from biodegradability testing in lab to
pilot testing on site. |
|
| CAPACITIES |
| The ISO 3 compartment system has the following nominal capacities
at an influent of BOD 1000 ppm, TSS 500 ppm and 95% cleaning efficiency in terms of BOD: |
| Model: |
20
ISO3 |
30ISO3 |
40ISO3 |
| Capacity: |
80
m3/day |
120
m3/day |
160
m3/day |
| BOD
load: |
80
kg/day |
120
kg/day |
160
kg/day |
|
| The ISO 2 compartment system has the following nominal capacities
at an influent of BOD 1000 ppm, TSS 500 ppm and 80% cleaning efficiency in terms of BOD: |
| Model : |
20ISO2 |
30ISO2 |
40ISO2 |
| Flow : |
120 m3/day |
180 m3/day |
240 m3/day |
| BOD
load : |
120 kg/day |
180 kg/day |
240 kg/day |
|
| The
ISO V single compartment system has the following nominal capacities at an influent of BOD
3000 ppm and 80% cleaning efficiency terms of BOD: |
| Model : |
20ISOV |
30ISOV |
40ISOV |
| Flow : |
100
m3/day |
150 m3/day |
200 m3/day |
| BOD load : |
300 kg/day |
450 kg/day |
600 kg/day |
|
|
| Generally, systems with additional requirements to
effluent, COD will normally require longer retention time and will consequently have
lesser capacity. Such systems will be designed as customized systems based on the
customer’s influent analysis. |
|
LARGE
PICTURE
OF
EEC
BIO
|
|
EQUALIZATION AND HOLDING SYSTEM |
| It is assumed that the waste water piping system ends in
a customer provided three-chamber combined buffer/pump well/ sludge storage tank system
prior to the HS Bio Tec system. The buffer capacity must be sufficient to level out the
daily peak flows and hold sufficient water for preservation of the bioculture during
weekends. The holding capacity of the system should be at least 24 hours, depending on the
weekly flow profile. |
| SYSTEM
SPECIFICATIONS
ENTER
HERE
FOR
APPLICATION
FORM |
| Equipment
|
Specification |
Unit |
20’ISO3 |
30’ISO3 |
40’ISO3 |
| Tank
Container |
Overall
Length |
Feet |
20' |
30' |
40' |
|
Overall
Width |
Feet |
8' |
8' |
8' |
|
Overall
Height |
Feet |
8' |
8' |
8' |
| Bio
Medium |
Proprietary
AMB Bio Media |
|
|
|
|
| Electrical
System |
Installed
effect |
kW |
6 |
9 |
12 |
| Shipping
weight |
Dry
weight |
kg |
4400 |
6200 |
8000 |
| Operation
weight |
Water
filled |
kg |
36200 |
50800 |
65400 |
|
|
Larger
models are available upon request.
EEC's Research and Development team
is continuously updating our
technology and specifications FAG |
